File: Gothic Serpent M1A.jpg (3.4 MB)

3.4 MB JPG

>>65018415
Oh new thread.

I just shot my M1A today. Had a couple of failures to feed in two or three out of 7 of my checkmate magazines with M118LR. I've been shooting the same rifle with the same magazines since October or so. Never had this happen before. Can you guys offer any insight? Maybe the magazines or the rifle was just dirty. I also replaced the stock recently and had to replace the connector lock pin to fit it. I ran my finger through the action to scoop up a lot of gunk and after that there were no more FTFs, so maybe it was dirty enough to cause issues there. I also had a failure to extract, kind of a odd thing but I think the open scope cap is what caused that. Anyway lately its been kind of frustrating because every time I change something on this rifle, I get a new problem. I hope its just changes in tolerances/settling into the new stock because after those two or three FTFs in the beginning the rifle ran smooth.

File: videoframe_2013.png (429.8 KB)

429.8 KB PNG

>>65018415

>>65018340
>>65018408
I assumed that was a thermal. What the hell is it?

>>65018730
european ACOG, that's the steiner S432, there's also the cheaper T432 which was showcased on HK MG4s but i don't know if germany used them on their MGs

File: svtinnabush2020.jpg (1.6 MB)

1.6 MB JPG

>go to local gunshow
>see a MAS 49/56 in 7.62 NATO
>the seller wanted $4K leafbux ($2,877.59 for burgers)
I miss the time when these guns were obscure enough to not be astronomically pricey.

>>65018854
Neat. That muzzle break is hideous though.

File: foxu 321.jpg (1.3 MB)

1.3 MB JPG

>>65018415
>Small Cat Girls Big Rifles Editon
that's a fox girl. good thread though.

File: 20251108_144541(1).jpg (3 MB)

3 MB JPG

Posting in a foxu thread

>>65019002
>Fox girl
damn what an over sight. My bad frens

File: HEgnIILaIAAw2jY.jpg (159.4 KB)

159.4 KB JPG

This and a rifle that fires a full powered carriage is all a man need to be happy.

>>65018415
Cute op pic!

>>65019815
>3 pack
In.

>>65019968
Nice. We need a third fren. Who's in?

>foxes invading other generals

>>65018487
Pop the mag bases off and look for crud/propellant residue in the mag body and on the follower.
If it continues to do it, try again with the old stock.

File: IMG_5807r.jpg (3.6 MB)

3.6 MB JPG

>>65019815
>>65019968
>>65020243
In. I just got back from a rodeo and there were a lot of pretty girls. No asians that I could see.

>>65020672
I wish I lived in the desert. Where is this, New Mexico? Nevada? West Texas? I can't get over the beauty.

File: gendo foxu.png (235.8 KB)

235.8 KB PNG

>>65020311
that's all part of the plan

File: IMG_5670r.jpg (3.3 MB)

3.3 MB JPG

>>65020677
It's pretty cool. That was just on the way to where I was going. There are these cute butthole formations in the rock but I'm not sure if I can post that, being a blue board and all. At least not til bump limit.

>>65020750
What part of the US is this?

>>65020764
Aw shit I thought I said it was Utah.

>>65020777
Neat and checked. Maybe Mormon land truly is holy.

>>65018772
Didn't know you cannucks are still having gunshows, they're dogshit sting conventions down here too for the most part. Isn't just about semi auto rifle banned up there now? Fwiw the Century 308 converted MAS49 have a bad reputation for slam fires. Nice mountains

thinking of getting a FAL thoughts?

>>65020750
>butthole formations in the rock
I wonder what that would be like?

File: Screenshot_20260329_054557_Gallery.jpg (1.4 MB)

1.4 MB JPG

>>65021850
Natch...

>>65018956
Keymod is worse

>>65021900
I was being nice. That whole thing is hideous lol

>>65018832
>bowel movement 59 not getting any love
Sweet wood, this is a beautiful rifle.

>>65021952
For me its the integrated bipod and grenade launcher.

File: IMG_5683r.jpg (3.7 MB)

3.7 MB JPG

>>65021850
I'm not the only one that sees this right?

File: Screenshot_20260329_075820_Gallery.jpg (788.4 KB)

788.4 KB JPG

>>65022166
Eventually, you'll have that sort of thing.

File: IMG_7509.jpg (2.7 MB)

2.7 MB JPG

>>65022187

File: Screenshot_20260329_081230_Samsung Internet.jpg (812.3 KB)

812.3 KB JPG

>>65022216

File: 6_bope_ago_052.gif (241.1 KB)

241.1 KB GIF

How can I clone this with commonly available ar308 parts?

>>65022247
kek

>>65022262
https://centurionarms.com/centurion-arms-quad-for-7-62/centurion-arms-8-7in-free-float-quad-rail-7-62/

afternoon frens

File: stacking intensifies.jpg (2.7 MB)

2.7 MB JPG

>>65023604
Hello. I hope your day has been good.

>>65023670
I was crawling in switchgear today. so its wasnt bad actually.

>>65023670
Much travel, road trip over, all good. Sneaker Pimps, Portishead and Echo and the Bunnymen noted in playlist

>>65018750
Worth or no? I am tired of watching ACOG prices go up.

>>65023670
Too early to tell. 3h to a job praying I have all the parts I need.

>>65024220
They don't make them anymore so you be the judge.

>>65026468
I mean, the Steiner you mentioned retails for half what even the cheap end of 7.62 ACOGs do. That's why I was asking if you felt the performance was comparable.

File: M1 Range day Resized.jpg (1 MB)

1 MB JPG

>>65025557
How'd the job go? Hopefully well.
>>65024124
Nothing beats a good road trip.

>>65026983
Wtf where are all of the .308 ta31s? Maybe with the eye relief it’s better this way.

>>65026983
Where are they being retailed? I don't own one because they're always out of stock and forever will be.

I will not be wronged, bump.

>>65021365
Less think more do

>>65024220
euro anon here
Steiner T and S series are still being made and they are worth it, T series are cheaper here (around 800€ for the 432) while S series cost more (1208€ paid for mine).

they are def worth it and come with either 308 or 223 ballistic reticle, for the S series, the illuminated reticle is done with a simple CR2032 battery and you have multiple settings including 2 NV settings for night vision

>>65029942
>one thousand yurothingies
I'll just buy an acog thanks.

>>65030107
Good man.

>>65030107
if you're on the US market then yeah, no reason to get one except a slightly better FOV. ACOG can still be found for cheap.
in the EU ACOG are unobtanium since the war in ukraine and before than they costed a minimum of 2000€ (3800€ for one with the RMR).
so it leave you with two choices, either the Steiner that cost 1k€ or the Elcan on brownells for a wooping 3500€

>>65030664
I've never seen a new steiner for sale in the US so the ACOG isn't even really a choice.

>>65030692
Just get a p4x or something.

>>65030797
>low-usefullness meme optic
rather not

>>65019017
Genuine question.
How is the 3x optic in your opinion?

I'm looking at possibly getting a single optic carry handle for mine, but I hear that it's kind of dated. I want the aesthetic for sure, but at the same time, I'd like it to be practical as it will be my default 5.56 rifle.

>>65032247
I'm warming up to lpvos.

>>65032415
I'm warming up two leftover sausages.

>>65034310
I am a left over sausage.

>>65034310
I always have two left over.

>>65032415
I like my ACOG more after buying a cheap lvpo

afternoon

>>65034845
LVPO are nice but their use is quite niche, the higher FOV really help if you get into competitions.

>>65034845
Yeah I got a strike eagle and that's why I wrote them off for years.

if you dont need a high powered optic for distance shooting. Acogs really are the sweetspot for BRs

>>65037687
It’s lame that they don’t make a chevron .308 ta31.

File: 1775165851058488.jpg (1 MB)

1 MB JPG

>>65018415
Stole these.

File: 1775166078018677.jpg (704 KB)

704 KB JPG

>>65040048
In case ya'll wanted a set.

>>65038427
The 150gr 308 and 55gr 223 are basically the same

>>65037687
Ive been running a PA prism and Im tempted to take the red dot off since I never use it. I can still do muhreen style aiming with the glass quality.

>>65040108
>150gr
Haha, yeah.

>>65040116
The only reason I don't take my stacked dot off is laziness.

>>65040116
I’m running the PA 3x SLX did you mean you have a 1x and a magnifier? The 3x is like the perfect level of magnification and can pretty much function like a dot.

>>65032411
Nta but they’re shit and a waste of money, peak aesthetics but literal airsoft tier, plastic cylinder with two screws and a spring to adjust, it’s a miracle it holds zero at all. Too bad Tommybuilt is gone, I’d tell you to get one of their rails that replicates the look and has a rail section where the optics go like I have.

>>65040235
Its the 3X (Macro) Prism

>>65040235
What happened to Tommybuilt?

File: 20260403_165615.jpg (419.1 KB)

419.1 KB JPG

Removed the dot, the 3X is all I need.

>>65041443
I only ever see those on ARs. It looks way better on other guns.

>>65041468
The screws really work well with 1940s-1950s hardware.

>>65041068
The MP7 boondoogle put them under a year ago or more now. It’s lame because I actually liked their products and before the HK rifle explosion of the past couple years, they usually had stuff like bipods and things cheaper than HKparts.

>>65041518
I didn’t pay attention to that can I get a qrd? I heard mumblings about mp7s but then I stopped hearing them and forgot all about it until your post. He’s not seriously done right? This can’t be happening.

Anyone make a non-cucked AR-10/SR-25 lower that is available for purchase in current year?

>>65041557
No one.

>>65041538
That is the QRD, tried to make MP7s, didn’t, chapter 11, pretty straightforward. I know their assets were split up between a few different companies that now offer their services, namely Black Ops Defense, a few others.

>>65041557
The ar10 market still kind of sucks. I keep thinking they are going to get popular but nothing ever happens.

>>65041578
Damn that sucks. Fucking mp7.

>>65041557
>non-cucked
Nobody
>kinda works
LMT
>kinda works and you can buy it easily
V7

Took my JRA M14F out the other day to get a rough 25yd zero at the local indoor range. Disappointed with the results, pic rel. Felt like I was chasing zero over 100 something rds, so maybe it's the sights?
Best I can figure is I need to send it in to a gunsmith for proper tuning and setting, I've sone enough reading to know I don't have the skills or tools to properly set it right. Any tips or advice for things I could do? It had the trigger and bedding done before I got it, gas system is unitized. Might end up replacing the stock at somepoint with a blackfeather RS.
In other news, AE released an adapter for the M14s that replaces the front sight assembly, but it's only for 22" barrels. I'm gonna reach out to them and see if I'd be able to cut one down enough to fit an 18" barrel, slim chance but worth a shot.

why is 308 skyrocketing again?

File: 1775310392510244.png (1008.8 KB)

1008.8 KB PNG

>>65043045
Jews but unironically

File: rangeday.300yards.jpg (3 MB)

3 MB JPG

>>65019011
Beautiful rifle. Sometimes I fantasize about moving back north. The desert heat gets to me sometimes, but I also enjoy the western culture. The family I have in the Pacific northwest are either moving south near me or decide to stay north and constantly bitch about how awful it is. Also, what sling is that?

>>65020677
Come visit during the summer before you decide you love it.

File: IMG_20161112_143920.jpg (1.6 MB)

1.6 MB JPG

>>65044702
>visit during the summer
Good advice. I predict the growing SW population will be unsustainable for the water supply. But what do I know?

File: IMG_20161112_140919.jpg (1.7 MB)

1.7 MB JPG

>>65044827

>>65044827
>water supply
Our water would be just fine if the Commifornian vampires stopped suckling all our water to grow almonds and avocados, then dumping the rest in the ocean because they can't risk cutting down a single tree to build a reservoir. Also we have way too many golf courses.

>>65044842
>way too many golf courses
Total agreement. Hate the citrus grove conversions to lakeside home communities, hate the "build the golf course, they will come" strategy, miss the Lake Powell and Lake Mead overflows of the early 80s. Forgot, hate the illegals, but the Californians are worse.

>>65044862
I'd take 1,000 illegals(if they are mexican) over 1 filthy Californian. Hell even the Michigan snow birds are getting on my nerves. All the recent developments are to please rich out of state boomers instead of the actual residents.

>>65044877
>please rich out of state boomers
The "grass > xeriscaping" will never not torque my sensibilities.

>>65044889
This. AZ has crazy cool biodiversity and nobody appreciates it. They just want a few pretty rocks then a bunch of bland modern plants.

How bad are the Indians in Texas? is it really as depressing as social media makes it look?

>>65045179
Can’t speak for Texans but AZ has been getting a fuck ton. Every uber and door dash driver is a poo that doesn’t speak English. And they are slurping up most of the mid tier office jobs.

File: IMG_8740r.jpg (3.3 MB)

3.3 MB JPG

>>65044702
I live in the desert but I’m near some mountains that I can go to for snow. I was hoping this spot would have snow but it was only in the immediate area where I parked. Nice n slushy so my car is a mess. I don’t know Arizona though, you might be sol. You don’t have to move all the way North though.

>>65045179
Every John Wayne movie I saw, Indians were a shit!

Does anyone in here own a Swiss STGW 57/PE 57?
Been wanting to get one in .308 (not the AMT its just re-barreled)

>>65045337
Oh I know it gets cold and snowy for a few months. Use to live in Northern AZ for a few years. It was nice retreat from the heat and I have thought about moving back. But its not very populated and mostly old rich retired folks. I still want to be in a somewhat nice populated city with things to do. Im not a total live-alone-outdoorsman.

File: IMG_8728r.jpg (3.7 MB)

3.7 MB JPG

>>65045592
Yeah it’s not exactly bustling here. Those rich people have daughters and granddaughters in their 20s though. Is there anything you would recommend to see in Northern AZ? I’ve been to Page and that was awesome. I’m trying to come up with weekend trips. Right now I’m larping in the mountains but I left my boots so it’s not going as well as it could be. Lotta mud from the snow.

>>65045740
I didnt explore nature up there very much unfortunately. Flagstaff is nice, I recommend the observatory and hiking anywhere around the mountain. Jerome is cool if you want to tour a TINY ghost town. Recently I took my wife on the train tour in Clarkdale. Basically a booze cruise but you get to see a lot of cool nature and learn some cool AZ history.

File: IMG_8745r.jpg (3.7 MB)

3.7 MB JPG

>>65045754
I’ll check out Flagstaff. It looks like I go through Page to get there and there was a trail I didn’t get to do because of a fire so this works out nicely. I think I saw that train or at least one like it, it looked fun and I’ve been keeping it in the back of my mind. This pic doesn’t have a gun in it but I was shooting from where those fir trees are, kinda to the left of the center.

>>65045754
Jerome looks sweet I’m 100% going there.

>>65020968
>Isn't just about semi auto rifle banned up there now?
nta, but yeah pretty much. SKS is the only affordable semi in an affordable caliber these days

File: 20240915_091526.jpg (1.9 MB)

1.9 MB JPG

>>65045841
Nice choice. Buy in Clarkdale, but add in a thorough and complete water purifier system. Oc not rel.

>>65045841
Just be smart, if you’re staying the night, eat early. There are no gas stations or little markets to get food after hours. After like 9 all the restaurants close and you can’t get food for 50 miles. Happened to me and my wife. Bar crawled all night then went to find food and found it was all closed. Luckily we packed extra sandwiches for the trip otherwise we would have had nothing. Also bring guns, everyone there gives off a small town horror movie murder vibe

File: IMG_8511.png (951.4 KB)

951.4 KB PNG

>>65045965
I have one but I never use it. I should probably start bringing that with me. There’s a place called Allah near there, that could be funny. I saw Mount Ara Ara recently. It was not the promised land of big titty milfs.

Is Bula/Fulton worth it?

File: Screenshot_20260404_191346_Chrome.jpg (733.3 KB)

733.3 KB JPG

Type 64 bros. We won

>>65046031
I appreciate the advice, they go to bed early as fuck out here.
>bring guns
I always keep that thang on me (it’s a g43).

>>65046064
Also, there is a super cool duplex Airbnb right the entrance to town to stay in. Get the top floor and it has a floor to ceiling window that looks straight down the cliff. You just have to climb about 5 flights of stairs.

File: 1771132279633279.jpg (101.5 KB)

101.5 KB JPG

>>65046060
nice

>>65046043
>I have one but I never use it
I only mean for your home, after you relocate. A little arsinic never hurt anyone.

>>65046075
>You just have to climb about 5 flights of stairs.
That’ll be fun.

>>65046125
No more relocating, my shit is too heavy to move again.

File: dirty h.jpg (14.1 KB)

14.1 KB JPG

>>65046155
>a man's gotta know his limitations

File: IMG_8748r.jpg (3.9 MB)

3.9 MB JPG

>>65046201
>have i fired 19 shots or 20?
>are you feeling lucky punk?

>>65046043
That says Ararat, not ara ara.

>>65046064
Based Gewehr 43 enjoyer.

>>65046713
Funny thing, actually owning a book titled 'Arizona Place Names', I had to look up Mt Ararat and there isn't one in AZ, muchless near Jerome. Nevada yes, but I didn't take time to cross reference the other names on that screenshot.

File: 87qrblvcax481.jpg (185.7 KB)

185.7 KB JPG

>>65048284
>He doesn't know Arreat Summit

>>65048284
That wasn’t in Arizona it was Nevada. I’m not from either of those states, I was the one asking about Arizona.

>>65048350
>That wasn’t in Arizona it was Nevada
Yes, I know.
>>65048339
No, I don't know.

>>65048355
Oh yeah I see now. It’s early.

He is Risen! Happy Easter /brg/!

>>65048667
Happy Easter! I went to the range today, it was okay. Wish I brought more ammo. Might go tomorrow, hopefully they have a good selection in town.

File: IMG_20260226_163904223.jpg (2.7 MB)

2.7 MB JPG

My C308 has a Fren now. A PTR-91 A3SK. Got it in a trade from a dealer who had a new/old stock one from California so I promptly de-Californicated it. Currently has a Turkish collapsing stock and a Paki wide handguard.

Does anyone know if these take standard G3 flash hiders or are they threaded like US AR-10s? It has the solid metal Faux-hider meant for California and I have an HK-21 FH on the way. I suspect I might have fucked up ordering it because the thread pitch might be different. Also did they just spin them on for CA or is it rockset/locktite in place? I don't see any signs of pin/weld like the C308 brake is.

Also yes that's a 1980s Thermold magazine I got for $5 because it looks cool. I don't actually use it.

I need to buy optics, but I don't want to buy optics.

>>65050029
I have always said, after learning from regret, never let owning one stop you from buying another one. Pity the mags don't swap.

>>65050262
I need to invest in frt tech, but I want a 1903 Hammerless.
>must...
>buy...
>accessories...
Plus, that Tango 6 is $1800.

>>65050262
I wish the stores here had a bigger selection it’s all just vortex and leupold.

File: 20250511_061646.jpg (1.4 MB)

1.4 MB JPG

>>65050406
I bought a Vortex Tee in Goodwill yesterday for $3. About my level. But it feels like wearing stolen valor, bc I don't own any Vortex. What do?

>>65050420
You have to do more than just own a vortex. You have to send it in for repairs.

>>65050440
They repaired not replaced my $300 SE 1-6x after my FAL ate it

>>65050730
You got a sweet hat thought right?

>vortex owners group, vog's currency of happiness is a trucker hat
I could see that.

File: foxu 311.jpg (1.1 MB)

1.1 MB JPG

>>65040048
>>65040050
have one more

>>65050923
No I always ask for slaps

>>65046060
Inb4 oops all Howa bolt actions

File: FALcookie25.jpg (1.1 MB)

1.1 MB JPG

Bump

File: little fox stolen glove.jpg (1.8 MB)

1.8 MB JPG

>>65018415
SHES A FOX YOU STUPID MONKEY

File: little fox with a full rack.jpg (972.5 KB)

972.5 KB JPG

Jeez, the nerve of some people going around and calling the Little Fox something other than a fox girl

File: little fox woah that's a lot of m14s.jpg (731.5 KB)

731.5 KB JPG

last one

>>65050378
Not sure what you mean. The magazines fully interchange between my C308 and PTR. My only concern is the PTR possibly not accepting a non cucked flash hider, or not being able to crank the existing one loose without wrecking everything.

>>65051859
Well, at least they are good rifles. Shame they are imported exclusively by a crap tier importer that doesn't want to offer any cool options like scout rifles or a fully functional version of the ceremonial drill rifle that Howa makes. Guess they hate money.

>YOU CAN'T JUST PUT ACOGS ON ALL YOUR BATTLE RIFLES!!!
Try and stop me.

I need a flash hider for my FNAR. Anyone know what will fit?

>>65053914
>FNAR
https://tornadotechnologies.com/product/fn-fnar-threading-service/
5/8" x 24tpi, $149, almost anything you want. I always suggest the Viper brake, but I'm biased.

>made a lowball offer on a TA55A
>it was accepted
...damnit.

>>65056503
long cog

>>65056503
Good catch. Would T55.

>>65057065
My only regret is that I didn't go lower since he accepted my offer without haggling. I should have started at 1k, but I was already offering $500 under his ask...

>>65055113
It's already threaded, thankfully, it just didn't come with anything on it. I have never heard of the Viper brake. This shit looks goofy and based off vids, pretty old. What's it provide that something newer doesn't at that same price point (almost $300)? Not saying I am walking away from your suggestion, I just don't know enough.

>>65057256
It's tunable.
>AI Overview
>"Tunable" refers to anything capable of being adjusted, typically for pitch, frequency, or configuration
Remember, you can tune a piano, but you can't tuna fish.

File: 20260406_233515.jpg (1.7 MB)

1.7 MB JPG

I've been working on mounting the scope a while, finally traded for this SG1 mount rather than trying to mod a stanag one. Ordered a leather sling, now I just need to build some sort of cheek riser

File: 1703416774352510m.jpg (82.2 KB)

82.2 KB JPG

>>65018415
Big things coming, /bsg/ at least I hope so.
>traded old Century CETME Sporter for WASR
>years go by, miss CETME lots
>bought OG barreled kit from J&G ($125 and it looks unfired and great except for the patina on the metal)
>bought flat and weldments from HK Parts
>have welder
>have hydraulic press

Any specific resources you gamers have for instructions? I know some forums (weaponsguild, hkpro, even FAL and AKfiles).
God bless

>>65058091
>build some sort of cheek riser
Where is tube sock and duct tape guy when you need him?

File: DSA FAL.jpg (88.2 KB)

88.2 KB JPG

>>65018415
Centerfire has Belgian FAL parts kits in stock for sub $800

https://centerfiresystems.com/belgian-fn-fal-7-62x51mm-308-lebanese-contract-parts-kit-polymer-furniture-with-original-populated-intact-barrel/

File: IMG_8019.jpg (1.3 MB)

1.3 MB JPG

>>65058823
>Where is tube sock and duct tape guy when you need him?
He got that tube sock duct-taped to something.

File: Screenshot_20260408_022838.jpg (726.1 KB)

726.1 KB JPG

I suddenly do not regret my purchase.

>>65045841
Jerome sucks desu other than the views from some of the shops. It's a total tourist trap of a town, but not as bad as Sedona. If you're into mining history it's cool, but beyond that there are 100 other places to go that are cooler.
>>65046031
Cottonwood is like 15 minutes away and has fast food, tf you talking about bruv?
https://maps.app.goo.gl/yrnyX1eydW9EM1Gv9

>>65060072
Saw wheat!

>>65060127
>has fast food
Everywhere fast fast food, bro. Do yourself a favor and try Juanita's Kitchen in Cottonwood or abeto's Corner in Camp Verde. The Place in Flag is the place. Sundowner in Sedona is almost the only place I'll eat there. Randall's in Cottonwood has had my business and will again.

DSA sa58 question. I'm getting failure to feed on every third round, even on full gas.
Cases are ejecting just fine, is this a mag issue like I suspect? I'm not used to the platform. It's the polymer one it came with.

>>65060675
>It's the polymer one it came with.
Meaning a DSA poly mag. I wouldn't trust it, muchless buy one. I would set up an email alert for steel mags from DSA or otherwise seek out a few surps.

>>65060754
>>65060675
I have no issues with DSA polymer mags except for first round feed from a locked back bolt since my recoil spring is a bit tired, other than that, they feed just fine.

>>65060761
>no issues
>except +1
Seriously, glad your's works. I have never tried one. WTF Magpull and X-Products?

>>65060771
If you slingshot the bolt handle, it’s not an issue, it’s just using the magazine release button/lever that has about 50/50 chance of it happening. I have like 4 plastic mags and they all work, even after being left loaded for a few years. X-products drums work but opposite, it feeds every round but the last one. So 49 rounds of 7.62x51 instead of 50.

File: Screenshot_20260408_223459_Chrome.jpg (240.9 KB)

240.9 KB JPG

Frens. I think I've found something better than the 51k

File: 1368024967535.gif (1.3 MB)

1.3 MB GIF

>>65061002

>>65061002
At the very least, it's a better flamethrower than the M1.

File: 1775620637162777.gif (651.8 KB)

651.8 KB GIF

>>65061002

File: 1753928412037925.jpg (733.9 KB)

733.9 KB JPG

>>65053808
Here's your Acog battle rifle bro

>>65061148
Looks good, but that height above bore...

>>65061002
Whoa.

>>65060781
>X-products drums work but opposite, it feeds every round but the last one. So 49 rounds of 7.62x51 instead of 50.
My point being neither X-Products and MagPul make FAL mags and DSA poly mags just don't give me boners. That said, I've bought DSA reconditioned surplus mags that are the best I own, excluding my unopened NIB FN mags.

>>65060675
Most likely its the mag. I got worst korean metal ones and never have issues, but I once dropped a full plastic DSA mag off a bed onto carpet and it started to split in half.

File: Arlington_M1_12-31-2024_Saltech_muted.webm (2.9 MB)

2.9 MB WEBM

>>65061077
Flamethrower M1 you say?

>>65060675
Eliminate possible magazine issues. High chance it solves your problem. If troubles persist, I'd suspect return spring or feed ramps.

>>65061002
I was thinking to myself ".308 isn't expensive enough."

>>65060600
>nice digits
My point was he said there was literally no where to get food after hours... and there is. So he's lying on the internet.
We ate at Crema Cafe and Bocce in Old Town Cottonwood last week. Both were fan-fucking-tastic IMO. A bit high brow, but everything non-chain in that area seems to be. We tried Brewha in Cornville and were disappointed af. We were going to do Haunted Hamburger in Jerome but that fucking town was like an ant hill of tourists in the middle of a Thursday so we said fuck it and just drove up to Prescott for food instead.
As par for the course, love the area, hate the tourists. We hope to move to Prescott in the next 5 years if things work out.

>>65062009
>he's lying on the internet.
Shocking!
>drove up to Prescott for food instead.
Rosa's on Gurley St is a great go to!

>>65060127
>in cottonwood
I know cottonwood isn’t that far, but it was like 9pm and we were bar hopping so driving was a no go. We just didn’t know everything closed at 9 and there was no sort of 24 market or gas station anything in Jerome. Not trashing it, just giving my fellow AR rat a heads up

>>65062557
Meant to say AZ rat.

File: cody jarrett.jpg (8.5 KB)

8.5 KB JPG

>>65062557
>bme
>crusin' down offa Cleopatra Hill
>north bound US HWY89A
>35 mph speed zone
>going 42
>jr officer joe bob hits his cherries
>fuuugh
>pull over quick
>yadaya
>do you have any firearms?
>hell yah! I gotta HK91 in .308 right here in the guitar case!
>WANNA SEE IT? :)
>NNOOOOO!
Lol, jr deputy lawdog. Shouldn't have asked, if he didn't want to see it.

>>65063430
7 over? Thank God the cops were there to stop you.

>>65063430
I used to go laughably fast everywhere until Florida signed a law that if you're caught going 30 or over, it's a felony.

File: ca.jpg (260.9 KB)

260.9 KB JPG

what's the meta on surplus rebuilt G3/HK91 rifles now? I think these are really neat that they are close to the original HK and are affordable. Are Century or PTR good manufacturers? I hear horror stories about poor QC internals. I'm torn between these or an AR10 variant.

>>65063711
PTR yes. Century is if you wanna save money.

>>65063711
The rifle as pictured would be best served by a welded rail for a scope mount. The claw mounts for optics are getting harder to, if not find, pay for. Aluminum, NIW mags are ~$17/ea @ RTG.

>>65063711
dont get a century.

I hate not bringing enough ammo.

>>65063711
They're both assembled by PTR in the same factory. So you choose between PTR's spotty QC on their new-made parts or good QC on decades-old FMP-made parts assembled by the aforementioned spotty QC.

>>65066436
There can be a minumum duration for satisfaction, based upon drive time, setup, and readiness. I live close, prepack, load mags and have easy setup targets on public land. So it's not a big investme t to go and a brick of .22 can last all day. Usually, 50 rnds of centerfire is a minimum.

>>65066470
>They're both assembled by PTR in the same factory.
Damn. Its a hit-or-miss for me. Some retailers have mil-spec South American military surplus parts and some have their PTR new made stuff. I would like PTR's welded rail receivers though.

>>65067679
that's an HCAR isn't it ?

File: Screenshot_20260411_065621_Gallery.jpg (1.8 MB)

1.8 MB JPG

>>65067693
Probably just Airsoft.

>>65067875
And that's what I'll tell the glowniggers

Weekend Report Time. How's it going /brg/?

>>65069412
Ammo boutique nearly done.

>>65069412
Pretty alright. I want to shoot but I need to replenish my ammo stocks. Other than that, I am waiting to get back on the flight schedule in my school and I feel like I should be studying more but don't feel like it. You can only review so much and getting too far ahead isn't really useful anyway.

File: 20260411_202100.jpg (2.5 MB)

2.5 MB JPG

Post Big Guns with Big Kits

>>65069412
Pretty good. I went for a hike this morning and found a bunch of smashed up rocks from I guess someone was trying to make arrowheads or an axe or something.

>>65069455
>make arrowheads
Probably indian arrows, comrade.
https://youtu.be/S7GMNTJa5zQ?si=caCkjxtKLshwyEom

>>65069412
>Went to my state's largest gun show today, in hope for 1903a3 stock
I swear it's easier to find a fucking unicorn than an A3 stock that isn't either sportizeried or overpriced to hell. That said I did pick up a G3 bipod for 80 dollarydoos and passed up a M65 jacket with liner for 30 (I came back for it later only to find out someone beat me to it, and congrats to that sob).

>>65069504
>M65 jacket with liner for 30
Yeah, that was a deal.

File: Cold War Trio.jpg (1.4 MB)

1.4 MB JPG

>>65069516
To be fair it was labeled Medium and I have freakish long arms and knowing my luck it won't fit me. So there's no point of crying over imaginery spilled milk, plus I like Tropentarn jacket better as back of the truck jacket.
Also I still think I made it out like a bandit with the bipod, and bonus to replace my original that doesn't work. (Literally one of the legs refuses to open and move despite cleaning and lubing).

>>65069541
The bipod was a good deal, too. I have seen them for $300, which is outrageous.

File: Screenshot_20260412_074708_Samsung Browser.jpg (322.3 KB)

322.3 KB JPG

Keep your hands full.

>>65066491
Yeah this range was further away so I really should have brought more. I feel like I spent most of the trip getting dialed in and it wasn't until the end that things were heating up but then it was over.

File: 20260410_133210.jpg (2.8 MB)

2.8 MB JPG

Rate my M110 SASS we have at home, and my old couch.
Fulton armory. 308 ar10. Nightforce 4x16 atacr, dead air sandman x.

>>65072190
>Rate
8/10 on the couch, 9.473/10 on the rifle. Nice job!

File: 1000030867.jpg (2.8 MB)

2.8 MB JPG

I didnt go to Mass again this weekend /brg/. How do I fix this bad habit?

>>65072631
Try to make some friends at church. It makes it easier to go when you know there's someone you can look forward to see.

>>65072631
3 Hail Mary's and vacuum out your car.

Does anyone have the image of the different battle rifles on the market? I am trying to find something that isn't an M1, that isn't an M1A, isn't an G3, and isn't a SCAR. I am not interested in SCARs due to the suppressor situation and price gouging. That means I am also not really interested in a MARS either because I think they're asking too much for what they're offering.

I was thinking an FAL, but I can't find anyone selling an Imbel near me and the guys who are selling FALs are all asking hilarious prices for them. There is that Mormon guy, but something about his rifle looks wonky to me and it feels like I am buying too niche a gun were I to do that.

Is there anything I am overlooking? I need a rifle to throw an extra scope I have on, and I don't want another SCAR (regret, but I won't sell mine), or G3 (already have one). I would get an FNAR but that company who sells the handguard never has them in stock, so it's unobtainium in all likelihood. Oh, and I already have an AR-10. I nearly forgot.

>>65073428
>I already have an AR-10. I nearly forgot.
We all forget that one. Winchester M100, Keltec RFB, HK SL7 or BM59?

>>65073428
https://atlanticfirearms.com/swiss-sig-stgw-57-parts-kit-w-original-barrel heuheuheu

>>65073448
>HK SL7
I love you, Anon, but I will not fall for your tricks again after you told me that finding a mount for a scope on this would be next to impossible and cost an assload even if I did. It's beautiful, don't get me wrong, but I'm trying to put a scope on a rifle, not have a rifle and a scope just stare at one another like wallflowers.

I was thinking about the Keltec because I don't a bull pup (lefty), but they claim it's fully ambi, so I'd just have to do my research first.

>>65073460
>next to impossible
I have 3: 2 , 1" and a 30mm. Can't be too hard. But yeah, buying a mag and scope mount to spitroast a rifle isn't everyone's kink. RFB it is!

>>65073484
>Can't be too hard.
Omg. They seem to have gone up.
https://www.gunsinternational.com/search-results.cfm?qs_cat=&Quick_Search_Keyword=HK05+Scope+Mount&start_row=1&the_order=6

>>65073496
Yup. That is why I didn't pursue the listing that was on GB last month. They literally cost almost as much as the gun does.

>>65073655
Yeah, sorry. That's nuts. Pity as I recently read the Lead Gunsmith at HK claimed the HK 630 was thier most accurate rifle and would really like a 940.

>>65073457
Why did you show me this

File: IMG_20260413_145533.jpg (2.8 MB)

2.8 MB JPG

My couch is not as nice as the other Anon, and my build isn't done (still need the correct trigger group), but it came in today. Hopefully by the time my suppressor is done being processed I'll have that as well, and we can call it finished.

>>65074400
Have you shot with the bigCOG yet or is it just for looking through?

>>65074559
It just arrived a few hours ago.

>>65074674
So are you waiting for an invitation? You're invited. It is rather chonky boy.

File: Screenshot_20260413_181053_Samsung Browser.jpg (445.1 KB)

445.1 KB JPG

Best price lately, hopefully these aren't covered in mold/coke/anthrex like the ones from Midway. Honestly, pick up 10 and use them to store your spare mags. These will be worth over $6 in 10 or 15 yrs! You can't lose!

>>65075307
Maybe next week. I am so busy this week it's kind of stupefying.

File: IMG_1083.jpg (708.9 KB)

708.9 KB JPG

>>65063711
Original FMP parts kits with some original H&K parts assembled by PTR with a brand new PTR barrel and receiver. Mine came with an H&K bolt in in it! I have run about 300 rounds through it with no issues. Very happy with mine.

>>65075525
I like the vinyl ones better than the rubber mold. God I loved buying them for like $2 back in the day. they were practically disposable

>>65074400
Needs a psg1 grip.

>>65075737
I plan on buying the trigger package and housing on HK Parts they have that has been made semi-auto so it's legal. I wish a wood grip was available somewhere. Maybe I could get one made?

>>65076107
rtg gets unfinished wood grips in occasionally but everybody wants them so they sell fast

>>65076147
I found a German company selling them for a lot of money, but that was as of last year. I fired off an email to them to see if they are still even active since it's catalogue based ordering. No images either, so I requested some. Need to know if it's the full grip or just part of it like the airsoft repros tend to be

>>65076147
>so they sell fast
They are in stock now! G3 and Cetme.

>>65076534
Thanks. I just need to get that bit for the bottom of the grip now, somewhere. I have no idea what that's called to look though.

>>65076849
Palm rest/hand rest?

File: Screenshot_20260414_101202_Samsung Browser.jpg (401.4 KB)

401.4 KB JPG

>>65076863
Palm rest. Wood grips in at RTG.

>>65074559
i had one on my AR, theyre nice, good eye relief and good fov an size. of all the memecogs its the most useful but NEVER buy one new. always wait to snag one for 900-1200

>>65076969
Apparently it's called a palm shelf. I found a company selling replacement ones for their non-wood copy of the grip. I am probably going to buy one, see if it fits the diameter of the one RTG I ordered and if it does then I'll drill holes, fit in some inserts, glue those into place and then screw the thing together. Should be pretty simple so long as the two fit.

>>65077076
>Should be pretty simple
Sounds like a fun project.

Captcha will not defeat/brg/.

How is the PA10? A blem lower is around 220 I know ar10's aren't as compatible as ar15's would I be stuck with having to get a PSA upper as well? What length should I be getting?

>>65078323
>PA10
no
>length
16" or 18" anything longer is fine but youre getting diminishing returns unless you run some hot ammo

>>65078323
You could rebarrel it but that would be kind of a waste when you could just build something from the ground up.

File: pix874781328.jpg (83.5 KB)

83.5 KB JPG

Need some help identifying an optic on a listing I am interested in.

https://www.gunbroker.com/item/1165633681

He says it's a 512, but it looks nothing like a 512 and also provides no info about which magnifier it is he has behind it. I am interested in this because it definitely looks like it's past the break in period (I read it's about 500 rounds), and has the foregrip that isn't sold anymore. If I can flip the two optics, I will, because I have a much better option on hand. Then I will just throw the Lucky Irishman handguard on there because I hate how the stock one looks. At that point this should be g2g, IMO.

File: Screenshot_20260415_194258_Google.jpg (190.1 KB)

190.1 KB JPG

Does anyone know what style or brand this strap is?
Im more of a /HG/ fag so im kinda in the dark with alot of accessories
I have a Ruger lc .45 coming tomorrow. Very excited

>>65080126
That's a single point bungee sling. You're gonna love it.

>>65080141
Thanks :)