Thread #65070227
File: IMG_0695.jpg (164.1 KB)
164.1 KB JPG
Behold, a Leopard 1a5
30 RepliesView Thread
>>
File: German panzer general russian heartland.jpg (38.2 KB)
38.2 KB JPG
Soon.
>>
>>
>>
>>
>>
>>
File: Med Tank Voxel.jpg (255.5 KB)
255.5 KB JPG
>>65070227
Slowly starting to resemble the unit from Red Alert.
>>
File: Comparison with West German Leopard Tank & Leopard IIK under development, 1972 leopard-3.jpg (169.5 KB)
169.5 KB JPG
>>65070287
>if the armor is this thin
If you are wondering if the ERA is going to break the leopard 1 side armor then no and I can explain why using facts and logic.
https://www.jaegerplatoon.net/OTHER_AT_WEAPONS1.htm
> "500 grams of TNT was enough to break 12-mm thick armour plate if pressed against it"
>"800 grams of TNT was the smallest practical useful explosive"
>"This was closely equal to bundle of six old German M/1917 stick hand grenades, 6 x stick hand grenade M/17 á 125 grams of TNT = 750 grams of TNT"
https://thesovietarmourblog.blogspot.com/p/kontakt-1.html
>"Each Kontakt-1 block consists of two 4S20 explosive elements"
>"The mass of the explosive material in each element is 260 grams and the explosive power is equivalent to 280 grams of TNT."
Everytime a kontakt-1 block explodes then it has the explosive force of 560 grams of TNT, if you combine that with the one 2.3mm steel flyer plate that impacts the the tank it is mounted on then it is no wonder why something weakly armored like the BMP or BTR dies when the ERA explodes since the armor will break and turn into high speed fragments for the crew. The leopard 1 thanks to having pretty much twice the side armor thickness then the BMP-1 wont suffer from this fate. It also helps that the ERA is not directly placed on the side armor but on a metal frame which has some distance from the armor which will help lower the explosive shock effect on the side armor.
Now is the ERA actually going to stop any HEAT warhead? That depends, kontakt 1 reduces the penetration of the HEAT warhead by 55% or up to 90% depending on hit angle or warhead type. A generic 300 mm penetration rpg warhead will defeat the side armor if it is only reduced by 55%. The ERA module could also not be using kontakt 1 explosive but Nizh which will fit perfectly inside a kontakt 1 module. I dont know enough about Nizh to talk about it confidently so im gona leave it at that.
>>
>>
>>
>>
>>
File: 1757398640609358.jpg (47.4 KB)
47.4 KB JPG
>>65070227
>>
>>
>>
File: era.jpg (62.3 KB)
62.3 KB JPG
>>65070227
needs more desu
>>
>>
>>65075248
It looks incredibly cargo culty to me. It's not on the same level of retardation like ziggers putting ERA on Buhankas and BTRs but it's close. The absolute worst travesty were Abramses plastered with this garbage.
>>
>>65076701
>It's not on the same level of retardation like ziggers putting ERA on Buhankas and BTRs
If you remove the explosive lens, it's just like putting an extra ~15 mm of applique plating, except in easier-to-replace modules.
>>
>>
File: apu_drool_crosseye.png (211.7 KB)
211.7 KB PNG
>>65070227
what's the point of putting ERA on an unarmored vehicle? it will just explode and kill everyone inside
>>
>>
>>
File: 1764751196799073.gif (961.7 KB)
961.7 KB GIF
>>65077172
>>
File: ukraine era stack.jpg (113 KB)
113 KB JPG
>>65075279
gentlemen
behold!
>>
File: Nozh-2_Duplet_1_T-84+Oplot-2397278398.png (880.9 KB)
880.9 KB PNG
>>65077247
That is pretty much how duplet works. Layers of ERA.
https://www.youtube.com/watch?v=ASTj8kA8wgw
>>
>>
>>
>>
File: f16 add era .jpg (94.3 KB)
94.3 KB JPG
Soon.