File: WASR 10 63.jpg (836.2 KB)

836.2 KB JPG

first for WASR 10

File: RPK.jpg (156.6 KB)

156.6 KB JPG

>>64884864
Nice

Future note to self: don’t try and bake a thread at the gym. Shits to hard on an iPhone 13.

AK Buyer's Guides

>Rifles
https://thinlineweapons.com/wiki/index.php/SimpleBuyersGuide
>Magazines
https://thinlineweapons.com/wiki/index.php/AK_Mag_Buyers_Guide#Quality

File: 1449254454353.jpg (136.1 KB)

136.1 KB JPG

>>64884834
Your format needs work; now go link it in the old thread, fren.

File: IMG_2827.jpg (1.7 MB)

1.7 MB JPG

>>64884130
>>64884155
>>64884240
Reminds me of this Krink build swissfag posted to try and “own” me in one thread (yes, he thought this was a flex LMAO).

File: krink rear rivet.jpg (180.3 KB)

180.3 KB JPG

>>64885031
Yeah. This rivet here is way undersized, you can see its the same size as the 5mm axis pin. This head in particular is only marginally bigger than the shaft (~4mm) A properly expanded head should nearly double the shank diameter. Just look at its size compared to the other rivet

>>64885061
What happens if the rivets are undersized like that? Does it compromise the integrity of the reciver or just the trunnion?

For investment purposes:
WASR or Zastava?

File: rivets-3.jpg (235.9 KB)

235.9 KB JPG

>>64885067
There is greater risk of the the rivet becoming loose because there is less "head" keeping it clamped in place. Once a rivet becomes loose its liable to shear off and/or stretch out your receiver as it bounces around the hole under recoil. I also seriously doubt that any of those holes have been dimpled. Pic rel shows what happens when you stick a regular rivet into a dimpled hole. Something similar happens when the head is undersized

File: 1690130682894.png (779.4 KB)

779.4 KB PNG

>>64885031
>>64885061
Just post your WBP, bro.
That swissfaggot isn't going to fuck you, no matter how pretty your fit and finish is.
>He's too busy ignoring Muslim rape gangs anyways.

File: sealing-hinged-dust-cover-v0-t6jsqhs3qknc1.png (925.3 KB)

925.3 KB PNG

>>64885075
>>64885067
heres an example of it happening

File: IMG_2967.jpg (370.8 KB)

370.8 KB JPG

>>64885076
>WBP
Always seemed expensive for what you got, at least PSA guns will last way past 10’000 rounds even if they’re cheap ass nitrite barrels wear out. One of the things that bothered me about WBP was them saying “the service life of the rifle is 5000 rounds” an AK should WAY outlast the barrel life and Micah Mayfield‘s video showed his still running after 13,000 rounds. One of the reasons I bought it over a WBP and rielly defense’s AK74s.
Here’s my hooptie rifle. I buy PSA stripped guns and put the furniture and triggers in myself, it’s about $200 bucks cheaper than buying a fully assembled rifle. Used parts from AoA for the dust cover, trigger and selector, (required a little bit of hand fitting but what guns don’t?)
Anyway yeah here’s my poorfag 74.

File: EPyTx-mXsAYv1Ob.jpg (345.2 KB)

345.2 KB JPG

>>64885137
>perhaps I treated you too harshly
At least you have a "crappy" 74. I don't even have that, I have to envy yours.
Of course, I have almost zero want of a 74 but they're still cool.
Just not my thing.
>plum is dope though

>>64885074
Why is either of these an investment?
Buy a Valmet if you want an investment.
WASR is fine, Zastava is fine.
>Inspect your rifle, before you accept it.

File: IMG_2970.jpg (343.7 KB)

343.7 KB JPG

>>64885180
I like it pretty good, occasionally it will stove pipe once in a blue moon, but only when shooting 7N6. My guess is because PSA under gases them from the factory so they shoot better. They probably used 60 grain wolf as the test ammo during R&D. Soviet era ammo definitely less consistent than modern ammo, part of the reason OG AKs are so heavily over gassed, allowed for more deviation in powder consistency/weight.
That actually makes me think, our overgassed guns a thing of the past? Sure having a non-adjustable gas block is cheaper and makes sense for a mass produced rifle and on a combat gun you’re generally going over gas to be on the safe side. But with as good as modern ammo is in terms of QC and consistency is it still necessary to have AK levels of gassing, especially with suppressors? Also ask this question because the VDV have complained that their new AK-12Ks with suppressors are way overgassed and it causes reliability issues at higher uncleaned round count.
Anyway plum is a definite vibe though.

>>64885208
Looking to sell it to someone who is too stupid for money when the next panic occurs
>I once sold 4 pmags to a guy for $150

File: IMG_0988.jpg (220.2 KB)

220.2 KB JPG

>>64885225
>>I once sold 4 pmags to a guy for $150
Damn, you must live in Colorado bro
>t. Lived in Colorado and sold all my worst guns and accessories during the coof panic for like 400% profit margin.

>>64884834
Will the Beryl handguard adapters ever come back in stock?

File: 20260220_001949.jpg (2.5 MB)

2.5 MB JPG

>>64885137
Heres my stripped WBP, I had the same thought process as you but I know someone personally who had a bad psa. I still really wanna buy their 102 builder kit and run the fuck outta it. I think PSA and WBP make good guns to buy off the shelf and go have a bunch of fun with

>>64884834
Of all the polymer furniture AKs, plum is my favorite color.

File: WBPAK74.jpg (453.2 KB)

453.2 KB JPG

plum is cool

>>64885074
Neither, buy a beryl.

>>64885317
Already have 5.56 Beryl

>>64885489
Alright then get an arsenal if you want an “investment” since they are no longer importing SLR series.

>>64885237
bros Im worried. My state has started showing up on a bunch of "move here in 2026" lists. I don't want a bunch of ban state niggers moving here and shitting up local politics. NM and Colorado are like 6 hours away from me

>>64885074
Zastava since they're more well put together and i definitely feel there are more WASRs and Dracos in America than Yugos

>>64885137
>the service life of the rifle is 5000 rounds
what rifle were they talking about? Does anyone have a source on this and what it was in reference to? I don't know why they would ever say 5000 rounds because even the cheapest of unforged slop could probably keep firing rounds for that long

What's the deal with WBP these days? I haven't been on /akg/ in several years but bought a Fox back in 2021 when they were still imported.

>>64885965
>>64885939
Look at the last 3 threads. We dont need to shit up another thread be re-litigating it

>>64885074
Neither.
But technically WASRs are no longer imported now that Century ended their deal. Good luck convincing anyone who has a braincell your rifle is rare though.

File: PXL_20250713_013910538.jpg (2.6 MB)

2.6 MB JPG

>>64885288
>run the fuck outta it
Bhahah good fucking luck. I bought one of the 102 builders kits. It made it 1200rnds before it started having some serious fucking issue that would deadline the gun and require disassembly of the bolt in order to remediate, after which it would only fire 10-15 rounds before the issue cropped up again. Pieces of shit toys. You ain't gonna run shit. Pretty well documented but something wears or shifts, headspace maybe getting fucked, and it starts blowing bits of primer into the firing pin channel which then seizes up the firing pin until you disassemble it, but then it just happens again. Well documented issue with the 5.56 PSA shit AKs. Sent it back to PSA... and you know what they did? They took like 70 fucking days because they re-barreled and redid the headspace by going through a box of random bolts and trying until they got one that passed. Absolute insanity.

PSA is shit. WBP is shit. ISD is shit, Nova Modul is shit. IO Inch is shit. Riley is shit. Pioneer is shit.

Zastava and WASR/ROMARM Cugir are acceptable.

>>64885939
Listen to this faggot yourself, fren:
First link, this production manager soi shithead literally out loud claims that 5000 or 10k rounds is "near the end of life of the platform"
WBP everybody...
https://www.youtube.com/watch?v=ne4aAYLfD_Y&t=95s

Second link:
https://www.youtube.com/watch?v=ne4aAYLfD_Y&t=340s
Same WBP moron claims that you need to use a stock that stiffens the receiver otherwise it can affect accuracy "sever issues regarding accuracy because you're changing the entire harmonics of the rifle" are literally his words... from using a polymer buttstock... Hilarious grifter gaslight shit that to mechanically illiterate reddit tranny faggots sounds convincing (same fags that love the NICE wood furniture!).

>>64885965
They're trash. They've always been trash. From when they were using cast trunnions, to now as they use machined from billet stock bolts and trunnions.

>>64885972
Too late.

>>64885994
How many more conclusions have you racked up? Also any recs for a gunsmith in case I fuck up my builds as badly as you so regularly do?

File: 1441934562479.jpg (94 KB)

94 KB JPG

>>64885980
Century didn't end the deal with ROMARM, it was a contract negotiation issue on price per unit that was resolved like a year and a half ago. They're still being imported last I knew, and I can't find anything saying that they aren't being imported anymore.
You can even check their import documents, they last had ROMARM imports in December 2025. For reference to compare, their last import from Nova Modul (company that makes the 9mm "AK"s like the WASR-M and Draco 9S) was November 2024, and their most recent import of Canik pistols was January 2026.

File: 1771532738456342.png (520.6 KB)

520.6 KB PNG

>>64885994
Care to explain this?

>>64885972
how about you just source it properly instead of repeating

>>64885994
>production manager soi shithead literally out loud claims that 5000 or 10k rounds is "near the end of life of the platform"
WBP says in the comments that he was mistaken and meant to say 50,000

File: drainbamage.jpg (239.8 KB)

239.8 KB JPG

>>64886247
Thank you for reminding him again. He has brain damage so he keeps forgetting this crucial detail

File: IMG_0075.jpg (65.8 KB)

65.8 KB JPG

>>64885820
It’s going to happen, after all it is one of the three constants in life: death, taxes, and ever increasing gun control.

>>64885075
>>64885084
Why would you not use swell necked rivets when the trunnion holes and receiver holes are countersunk? Are they stupid?

File: 20240326_144058~2.jpg (3.9 MB)

3.9 MB JPG

>>64884864
Based WASRchad
>>64885308
Based plumchad

File: 9deEjsrl.jpg (35 KB)

35 KB JPG

>>64886723
>Why would you not use swell necked rivets when the trunnion holes and receiver holes are countersunk? Are they stupid?
Stupid? Probably. Some people don't do it because it takes extra effort/tools. PSA didn't with their initial AK runs. The Zastava was dimpled but the rivet was loose so it sheared off

File: IMG_4294.jpg (597.1 KB)

597.1 KB JPG

WASR

>>64886737
>it takes extra effort/tools.
I use a steel ball bearing, didn't cost very much.

File: Screenshot_20260220_130400.jpg (252 KB)

252 KB JPG

>>64884834
>ISD Bulgaria making new stamped AKs
I wonder if they'll try 5.45.

File: image_2026-02-20_161831621.png (649.5 KB)

649.5 KB PNG

>>64886750
>I use a steel ball bearing
This works for the front trunnion and fixed stock rear trunnions but you still have to make a support block for underfolder/sidefolder rear trunnions because its possible to bend/break the wings off if you don't support the back side. I made a mini jackscrew out of a bolt for mine. The thin metal might bend before the dimpling occurs if you don't use a support

File: 20250817_021440 (1).jpg (2.8 MB)

2.8 MB JPG

>>64886761
Good point I didn't consider that, I've only built basic bitch AKMs so far. Thanks for the heads up too - my next build is going to have a side folder.

File: IMG_20260103_190845737~3.jpg (1.8 MB)

1.8 MB JPG

>>64884864
Based

File: 1757752230199931.jpg (54.9 KB)

54.9 KB JPG

>baby on the way
>Virginia banning fucking everything anyway
it was fun while it lasted i guess

File: polishUF.jpg (915.7 KB)

915.7 KB JPG

>>64886772
yeah you have to be careful. I slightly bent the first one I did just by hammering on it in my vice during demil.

>>64886789
>bayonet
nice. the lugs are ground off on mine so I can't mount one.

File: gun (gun).jpg (491.1 KB)

491.1 KB JPG

>>64887037
I was very lucky and got a 10/63 with lugs back in 2017, the bayonet is even electric penciled serialed to the gun as well and came in the box

File: 1751833892239437.jpg (876.1 KB)

876.1 KB JPG

>>64886743
I am still unsure if I like the way the Bonesteel stocks look on stamped AKs, makes them look like wannabe Galils in a way. An anon posted their SAM-5 with one a long time ago and I liked it on that though.

>>64887068
Polish bipod?

>>64887353
Yes

File: IMG_9278.jpg (2.7 MB)

2.7 MB JPG

It do be like that Mr. Stancil

>>64887600
Fuck this phone

File: 20250407_231754.png (914.5 KB)

914.5 KB PNG

>>64887600
who is Will Stancil and why did Grok rape him?

File: maxresdefault.jpg (156.1 KB)

156.1 KB JPG

tempted to get a JRA Gallant but it looks like they run badly in semi auto

File: 20231115_165637.jpg (3.1 MB)

3.1 MB JPG

>>64884834
Luv me plum
Simple as

KALASH
KALASH
KALASH
NA
*COUGH* *COUGH* *COUGH*

File: Screenshot 2026-02-21 090224.png (27.3 KB)

27.3 KB PNG

>>64885994
Why do you purposely spread misinformation? I dont care about you posting your opinions but spreading shit that has been corrected is fucked.

File: wuggyneedstokys.jpg (170.7 KB)

170.7 KB JPG

>>64888182
>Why do you purposely spread misinformation?
Because like all tripfags, he is a narcissist and can't ever admit to being wrong. He would sooner deny reality than accept correction from someone else

>>64888222
It needs to just cool it with the cuckoldry and stop shitting up the general. For instance, post something meaningful or interesting for once

File: 1551124775568.png (1.1 MB)

1.1 MB PNG

>>64886005
Why do all of his guns end up with a crease over the rear trunnion lmao? What is this idiot doing? The receiver is always warped and the finish is gone at this specific location

>>64888236
Like I said I'm fine with people shitting on things but it matters that they do it in a factual manner. WGWS is a net negative on the discussion here

File: IMG_0121.jpg (764.6 KB)

764.6 KB JPG

>>64888240
>why yes, I drilled the holes for the side mount myself, how could you tell?

File: scoperailcomplete.jpg (181.3 KB)

181.3 KB JPG

>>64888267
>why yes, I drilled the holes for the side mount myself, how could you tell?
That's not even an excuse because I did it with a harbor freight drill. He's gotta be doing things with a vice or an air hammer because my dumbass is doing things better with chink tools. Wrong rivets too. Those are supposed to be counter sunk holes and it looks like he's put regular non swell neck dome rivets in there. You can tell because they're below the surface of the rail. Very interesting discoloration happening on the rear trunnion too.

File: no 010.jpg (279.3 KB)

279.3 KB JPG

>>64886247
>>64888182
Cope damage control because there ain't a way in hell their nitride barrels and non true forged components are making it 50k... In fact we know from legit military testing that nitride barrels depending on firing schedule will give the ghost up anywhere from 10-30k.

>>64886756
>$1000 for a commercial grade piece of trash
This is bait but I'll bite. ISD Bulgaria is a bullshit commercial spec shop making AKs using who knows what parts, but we do know that they are NOT the same as Factory Circle 10 Bulgaria Arsenal. The same way that WBP just pretends to be legit by virtue of being European and in proximity to the legit Polish Circle 11 FB Radom factory, ISD Bulgaria is relying on dumb casual reddit scum to be like oooh it is made in Bulgaria is must be good!

>>64887600
I used to have a WASR super similar to that. Almost 20 years ago now.

File: wbp4.png (94.9 KB)

94.9 KB PNG

>>64888438
>WBP doesn't use chrome lined barrels
>if they do they're actually using reject FN barrels
>Actually I don't know if they are but its possible
>no I don't have any reason to think so

File: RPK-74M.jpg (107.2 KB)

107.2 KB JPG

>>64885237
I like the RPK-74M

Most reliable 5.56 ak?

File: wbp.png (109.2 KB)

109.2 KB PNG

>>64888487
WBP DOES use nitride barrels on some of their guns by their own admission. That point has SOME validity to it, even if Wuggy is using it to move goalposts away from his false claims about cast parts.
The product listings on their own site say the 5.56/5.45 rifles and the 5.56 pistols use nitride barrels, every single one of the models offered. The 7.62x39 rifles and pistol are generally the exception because they use FB Radom produced barrels, which is why they're chrome-lined and the others aren't. The only 7.62x39 rifle that isn't chrome-lined doesn't mention FB Radom in its description as well.
You can check yourself, pic is all of the nitride barrel listings edited together and labelled with the product name so you can cross-reference them. It's on every 5.45 and 5.56 gun, and one single 7.62x39 gun.
>>64888677
Zastava M90 or build a Galil.
Just buy an M90, Galil kits are expensive now.

>>64888677
Galil ace

>>64888692
>WBP DOES use nitride barrels on some of their guns by their own admission. That point has SOME validity to it
it's no secret. Normally it's finish is stated in the description.

>>64889115
Read my entire post, you just restated what I said.

>>64889127
i was just curious why you think we don't know what you said. It's like going into the handguns general and saying Taurus is shite haha

>>64889137
>why you think we don't know what you said
I explained where I found the information ("the product listings on their own site"), and you then tell me where that information is in different words. Yea, I know where it is, that's how I was able to say where the information I found and provided was from.
That's why I think you didn't read the whole thing, because you don't need to tell me where the information is, which is proved by the content of the post, but you did anyway.

>>64889174
and you thought people who look at the AK market obsessively don't know this

>>64889260
Both parties in the conversation on barrels before me apparently are either unaware of the fact WBP uses both types of barrel, or was simply cherrypicking examples to support their point, so it's a 50/50 on if that specific anon and tripfag do or do not know this.

>>64885137
Why do you post without a trip sometimes?

>>64885965
Same as it was in 2021. Still the best ak ok the market under $1500.

>>64886712
Oh you're demoralized.

>>64886710
Nice! Saving that one for future :)

>>64889592
>Still the best ak ok the market under $1500.
WASR, and M70 can be bought under $1500, I would trust manufacturer that military contracts and not polish dogs.

File: 65771494_390289584953573_2253425643360198392_n.jpg (264.5 KB)

264.5 KB JPG

>>64884834

>>64889649
as nice as these are and cool as it is to be a matching set, how much of a boring retard do you have to be to get 6 different guns and give them all the same color scheme

File: 14279105_308290686214420_3927250643001016320_n.jpg (51.3 KB)

51.3 KB JPG

>>64890056
I'd imagine if they're that much of AK autist, they have a crate full of alternative furniture for all those rifles.

>>64886897
>baby on the way
>VA shit laws
Don't worry, you aren't going to be going to the range on a regular basis until that kid is 4-5 years old.

File: 1538016381051.jpg (405 KB)

405 KB JPG

>>64889592
I think WBP is fine but I would still rather have a deeply discounted WASR.

>>64890562
that's what im saying

File: 20210529_213319.jpg (2 MB)

2 MB JPG

plum is cool but i think its time for a wood hg set for this thing

>>64892032
we really do be posting the same picture for years, how far akg has fallen

>>64889649
US “plum” is hideous

File: 24274308_149679898998222_8624034502026461184_n.jpg (266.1 KB)

266.1 KB JPG

>>64892256
K, but that's not US plum.
>I think the pic was just "adjusted" to make it "pop" more though.

File: krinkWIP (2).jpg (209.8 KB)

209.8 KB JPG

Finished up work until the Groza parts get in. Either the gas tube or hinge block is way out of spec. Its too short and incredibly loose, there's easily over 1/16" of vertical play between the tube and the plunger pin. I'll have to weld on it and reshape things with a file so its tighter. All of the other PSA parts seem ok so far.

File: Gas Tube Spring.jpg (8.5 KB)

8.5 KB JPG

>>64892503
One of these might be an easier fix.

File: A91165BF-F240-4A48-B130-5D976F5EA764.jpg (59 KB)

59 KB JPG

>>64892550
Thanks. Didn't occur to me that these work for krinks too.

File: eea970f82ce9086a35cee8310e073601.jpg (15.5 KB)

15.5 KB JPG

>>64892302
Thats clearly US made furniture you fucking retard. Next time post your own photo instead of borrowing someone else's, noguns

File: 1519128015178.jpg (44.5 KB)

44.5 KB JPG

>>64892573
I mean it's not like you need a seal on the gastube for it to function.
It might not fix your issue, but it's a much easier thing to try first because it just might.

>>64889587
I never post with a trip here, what are you talking about?

File: 24177758_2210050425888563_2980331085763706880_n.jpg (383.8 KB)

383.8 KB JPG

>>64892593
>clearly US made furniture
>Is actually visibly Russian, just color shifted to be more saturated
>resorts to ad hom "noguns" while not posting his
2/10, do better

File: IMG_9138.jpg (90.5 KB)

90.5 KB JPG

>>64892616
Keep cryin bitch nigga

the one and only issue I truly have with the AK is the location of the safety. Is there any way to fix it that doesn't involve a janky extendo lever a la Galil?

>>64892685
Rifle is fine

>>64892685
Stop overusing the safety like a sperg. Just don't use it. Your safety is now your brain. When you want to shoot something, put your finger on the trigger. When you don't, you don't put your finger on the trigger. Guntubers incessantly flipping the safety on and off every 0.5 seconds to look extra tacticool does not mean you have to do it too

File: image_2026-02-22_221426984.png (169.6 KB)

169.6 KB PNG

>>64892685
pic rel

also>>64892713

>>64892744
cringe

>>64892752
caint even disagree witchu mayne

File: img_1_1763297168337.jpg (365.4 KB)

365.4 KB JPG

I think this one is retarded!

File: barrelreamingsetup.jpg (526.5 KB)

526.5 KB JPG

>>64892596
Looks like other people have had to do it with their PSA parts. I think there's an anon here that owns a complete PSA Krink so I'm curious if this is an issue with complete guns or just the builder parts
https://www.ar15.com/forums/ak-47/Krink-upper-hand-guard-is-loose/64-170922/?

Bought the cheapest new WASR on gundeals, will I regret buying it without being able to inspect it first?

File: images (18).jpg (24.7 KB)

24.7 KB JPG

Is this shit g2g?

>>64888240
>>64888267
>>64886005
and people will still listen to that retard on how WBP's and PSA's are literally the worst possible AK you could possibly have lmfao

>>64885994
I cant believe you're still doing this bit

>>64894098
It isn't as bad as that reman'd crap. Don't expect Barnaul or Wolf performance or consistency, but it's better than the bottom of barrel shit. It shouldn't matter in your gun, since 7.62x39 barrels are almost never match spec, and 7.62x39 isn't high pressure to begin with.

>>64894012
>Bought the cheapest new WASR on gundeals, will I regret buying it without being able to inspect it first?
Excellent choice. Inspect it at your FFL BEFORE you do the 4473 and if you’re not happy with it send it back. Cugir improved their QC about a decade ago so you should be g2g. The boomers that bitch about WASRs being shit are the ones that bought pre-2016. Recent WASRs are good.
Where did you get it from, and how much did you pay?

>>64894318
Guns2U I think? Ended up about $860 shipped. Hurts because I know they were readily available for ~$600 pre-covid, but it's the cheapest non-domestic AK I could find now.

>>64894485
that's a good price, all things considered. As the other anon said, inspect it before signing anything, but you'll probably be okay. If it's the cucked version with a welded muzzle device, you can dremel those out really easily without hurting the threads or the barrel.

>>64894485
Have you tried giving local pawn shops and LGS a chance? There are LGS that will order one for you from their distributor for better than guns2u?

>>64894318
>>64894521
Thanks guys, appreciate the advice. Already ordered some bulgy mags and started stacking 7.62 so I'm excited to get my mitts on it.

>>64894485
$860 is good for a new rifle. Budget another $150-200 for surplus romy furniture, the shit it comes with is garbage. Let us know if it comes with a bayonet lug and a cleaning rod.

>>64894671
Didn't check any pawn shops, but the price I paid shipped was $50 over my LGS distributor's cost, before retail markup and tax.
>>64894695
Will do, thanks m8

Update: WASR arrived earlier than I hoped. Has bayo lug, no cleaning rod. Brake is not welded. Good riveting. Rail looks straight. Magwell seems machined properly, snug with an included US Plam and no wobble. Will test with bugly steel mags when they get here, but I'm optimistic. VERY slight clockwise cant to front post, barely perceptible, shouldn't be an issue to zero at all. Stock looks unfinished and will be replaced asap, but I'm pleased. She's coming home with me.

File: 1682153685871765.png (1.9 MB)

1.9 MB PNG

>>64895413
Congrats on the new rifle anon.
Don't bother with the furniture it came with - the plastic is junk and the wood is basswood which is cheap, soft, and not durable. Get Romanian surplus furniture, it's not too expensive.

>>64895516
Thanks man. Having a hell of a time finding any nice sets in stock that aren't pushing $300-400, I'll keep looking though.

>>64895516
>$300-400
All these years later I still have the surplus laminate that came off my early 2000s WASR, that I no longer have. I swapped it out for Tapco originally, got tired of that and bought plastic crap from Kvar, when all this time, rifle was fine. I keep fighting the urge to spend $900 on a WASR just so this furniture can have a home to rest.

>>64895703
Went looking at some off the beaten path places, but no joy.
Saw this on Combloc market, still less than $300.
Might want to peruse there or maybe throw a WTB up.
https://comblocmarket.com/classifieds1/russian-izzy-akm-stock-set.7590/

File: dong ad cropped.jpg (688.1 KB)

688.1 KB JPG

>>64895847
Thanks, I'll check it out. I was looking at the APS Firearms repros, they seem pretty nice.

>>64895877
I got you boo boo. Northridge is waaaay out of the way but they're legit, I've bought a few things from them in the past. Anyway here's a set of Romanian surplus. To echo what you and the other anon are talking about, it's weirdly hard to find right now. Every few months Arms of America gets a crate in though and always has some. But for right now:

Dong (just dong, upper handguard can be found many other places but not here apparently)
https://www.northridgeinc.com/product-p/ak47-romlhg.htm

Buttstock (does not have sling swivel or butt plate but those are easily sourced)
https://www.northridgeinc.com/product-p/ak47-rombts.htm

File: 20230603_190316.jpg (1.7 MB)

1.7 MB JPG

>>64895952
>>64895877
Then one day your ass can look this good.

>>64895847
>>64895877
>>64895952
holy shit don't overpay for any of this beat up incomplete garbage. I see nicer brighter looking dongs go for $60-$80 on AK files and romanian surplus butts for $40-60 just wait until those pop up on there and also wait for a AoA/atlantic/moka restock

File: Screenshot_20260223_213103.jpg (734.9 KB)

734.9 KB JPG

>>64895877
>>64895413
Also consider this on the files.

>>64895413
Hell yeah, based. Post pics of bayonet lug

File: 20240808_113853__94099.jpg (377 KB)

377 KB JPG

>>64895952
Totally didn't look at Northridge, nice call.
>Every few months Arms of America gets a crate in though
Seems like all the spare romy sets are getting scooped up and given this gay Paki "upgrade".
Like 3 people want that shit, and they're all Cartel members.
>and always has some
Well not now, but if I were him I'd go to all the sites and sign up for notifications for restock.

File: DSC03469.jpg (3 MB)

3 MB JPG

>>64895877
Do NOT buy repro dong or repro mil laminate furniture. There is nothing more groce and sovless than reproduction of surplus kit furniture. WBP fag laminate included.

There is PLENTY of surplus wood out there. Just search around.

shut the fuck up brain damaged faggot go back to /arg/

File: psakrink.jpg (2.6 MB)

2.6 MB JPG

>>64893431
My .300 BLK Krink from PSA is based but I probably wouldn't buy any other gun from them

>>64896034
>scrap "Pm 90" flat in background.
Lmao. How many times did you fuck up on one gun?

File: 1747848757744604.gif (1 MB)

1 MB GIF

>>64897031
Just going off the etchings its at least 3 receivers for one gun. Still wanna know who wuggy paid to unfuck his shit.

File: DSC04371.jpg (2.3 MB)

2.3 MB JPG

>>64897027
Round count?
Such a shame that they're not legit guns. I want a quality 300blk Krink so bad.

>>64897031
I didn't build it.

>>64897146
>Still wanna know who
Spoken like the histrionic "woman-like" gossiping tranny you are.

>>64897268
Oh this one struck a nerve. He held it together until this one. Why'd your "builder" fuck up so many times? Not just the "Pm-90" but the Ak-104 too is fucked up in the exact same way. That's like 5 fuck ups back to back. You totally built it and you're ashamed. Cope more

File: wuggyretardagain.png (15.2 KB)

15.2 KB PNG

>>64897268
>crying about gossip and histrionic personalities
Maybe dont go out of your way to have a username on an ANONYMOUS website

File: Screenshot_20260224_110250_Chrome.jpg (281.5 KB)

281.5 KB JPG

>>64897268
>I didnt build it
No you did. Unless pic rel is someone else with the exact same name. You fucked up every single one of your builds in the exact same way and paid someone else 3k to fix them.

>>64897373
>>64897146
You can tell whenever he's cornered, out of options because he starts throwing around pop-pysch terms and granny accusations. WGWS cheated on his ASVAB test so what else would you expect

>>64897268
like 500 rounds

QRD on how the tripfag fucked up his PM90?

File: 1750306278057237.png (635.3 KB)

635.3 KB PNG

>>64897899
see 64884130 Just compare this rifle to one he posts nowadays. Even after he had it rebuilt it still had the wrong scope rail rivets for awhile. People give him shit for it because he'd bash people for minor cloning mistakes only to fuck up multiple builds so badly someone else had to fix them. A lot of his guns have this weird crease mark, probably because he warps the receivers. >>64888240 The rifles he posts now are clearly different.


He wanted attention/clout for building until people started critiquing him, now he claims to have used "a good builder" even though there is incontrovertible proof of him talking about building it himself>>64897550
Maybe he was taking credit for something his friend built until people starting pointing out mistakes and he was required to scapegoat someone. Either way he is a liar.

File: Gorgeous Stenciling (1).jpg (2.7 MB)

2.7 MB JPG

>>64897899
>tripfag builds terrible Pm-90 and 104 clone
>brags about building it all by himself until people point out silly mistakes
>weeks later he has another builder correct all his mistakes
>years later tripfag now claims that building it himself never happened because he's a fragile bitch

kek all this wuggy bashing is inspiring me to go back and fix some of my fuckups on my old builds.

>>64898340
That black sun is fucking cool but imagine using that in a self defense case against some groid lmao

File: E124E555-3AAA-4029-B240-C8045744FA1E.jpg (371.2 KB)

371.2 KB JPG

>>64898603
I do it all the time. Wuggy does too but he'd rather lie than admit it because he's an insecure attention whore. Last thread he was crying about having his "character assassinated" Like homeslice, you are choosing to lie instead of own your mistakes at every opportunity. Whose fault is it lmao?

>>64898340
Nta, but that would be a gun I would hide behind drywall to await turner diaries 2 electric irl jigaloo.

>>64898913
>>64898340
Whoops meant that as a reply to >>64898790

>>64896034
Holy fuck those look like shit.

File: IMG_5538.jpg (1.7 MB)

1.7 MB JPG

got my first AK74, a bulgarian circle 10 kit build on a nodak spud receiver for $750 shipped

File: PXL_20250902_010747320~2.jpg (3.6 MB)

3.6 MB JPG

>>64899355
Good shit. Any idea what barrel? Looks great.

>>64898340
>brags about building it all by himself
Why do you just make shit up and lie? Oh that is right because you're completely disconnected from reality because you're a tranny.

>>64897987
>incontrovertible proof of him talking about building it himself
>"I had to put the shop head on the inside of the receiver"
This isn't me saying I built it myself though. Your reading comprehension sucks.
>someone else had to fix them
What?
>crease mark
What the fuck are you talking about
>rifles he posts now are clearly different
Yeah because they're completely different guns?

>>64897602
Oof. Go shoot dude.

>>64897550
>cheated on his ASVAB
Lol just making shit up. Psycho tranny.
>paid someone else 3k
Literally making up a number around an assertion that isn't even true. You're psychotic.

File: wuggyisdumb.jpg (117.3 KB)

117.3 KB JPG

>>64899391
Behold: Wuggy's fake ASVAB score. Wuggy did so well on his ASVAB that he got a composite score above the maximum possible score. Wuggy yet again projecting with his "lying tranny" accusations. How long will it take him to realize that lying doesn't work when the archive exists? Its almost like he has brain damage
https://desuarchive.org/k/thread/40009701/#40010524

so you did the rivets on a gun that you didn't build?

File: 1751994817828984.jpg (99.9 KB)

99.9 KB JPG

tripnigger can't go a single post without lying


>>64899391
have your final concussion faggot

File: 1551148789065.jpg (1.8 MB)

1.8 MB JPG

>>64899391
>what crease
I dunno does this look like a crease to you guys? Maybe its just me

File: xv0f3hmswix11.jpg (201.2 KB)

201.2 KB JPG

>>64884834
I'm an AMD guy, but wanted to ask the hivemind if any of you have ever touched a Groza.
I just think it's neat but don't think it's likely I'll ever get to put one through its paces.

File: FakeASVABOnsession.jpg (99 KB)

99 KB JPG

>>64899435
>cheated
>faked it
Or you know, you could just be wrong?

>>64899457
>crease
Can you circle what the fuck you're talking about?

>>64885031
Good bait

>>64899460
>literally just a bulpup krink conversion
Why not just buy a krink and put it through it’s paces.

>>64899464
>ahhh save me chatgpt
why do your guns have mystery horizontal lines over them? Also holy fuck those selector marks are horrible

>>64899475
I do want to do that, I just think the little bullpup weirdo is neat. Curious how the other side lives.

File: image_2026-02-24_222646896.png (6.6 KB)

6.6 KB PNG

>>64899464
https://www.militaryspot.com/marines/asvab-line-scores-2

>>64899479
Standard Childers AKM notches

>>64899355
>got my first AK74, a bulgarian circle 10 kit build on a nodak spud receiver for $750 shipped
Great deal. All matching? At that price I'm assuming US nitride barrel.

File: 1771983523694673.png (6.8 KB)

6.8 KB PNG

Why does he turn all of his AKs into abominations?

File: 1544608910957.jpg (2.4 MB)

2.4 MB JPG

>>64899487

>>64899507
Top Childers, bottom probably a dremel stone

File: mysterysolved.jpg (110 KB)

110 KB JPG

>>64899485
>This is not the official recruiting website of the U.S. Military. The site you are on is run by Sun Key Publishing, a private company, and is not endorsed by or affiliated with the U.S. Military.
Hmm I wonder what the explanation could be between the apparent inconsistency!?

>>64899479
>Selector marks are horrible
Yeah well they were made with a dremel lol

File: 1544608803334.jpg (2.7 MB)

2.7 MB JPG

>>64899516
I know what he did. He was building the gun he said he didn't build and fucked up so bad they had to be welded over

File: 1544850592916 (1).jpg (482.1 KB)

482.1 KB JPG

>>64899521
Do you honestly expect anyone to believe you scored a 99th percentile in every category?

>>64899522
Looks like he welded up the akm straight notches and switched to AK74 style, I’ve seen much worse ak work

File: 1523056405369.webm (2.9 MB)

2.9 MB WEBM

>>64899529

>>64899529
>>64899536
lmao what a stupid faggot

>>64899391
>Oof. Go shoot dude.
send me some free 300 lol. How many rounds you got through your 300 blk krink?

File: PXL_20210725_205619655~2.jpg (2.7 MB)

2.7 MB JPG

>>64898603
I sold my fuckup builds for pennies because of the shame.

>>64899529
>>64899536
Shooting live rounds at your bros behind cover is just stress training bro.

>>64899529
Friendly fire, like NDing, is just a normal part of gun ownership.

File: IMG_20200625_124509_4.jpg (1.5 MB)

1.5 MB JPG

>>64899529
Unlike you, most people don't just lie compulsively.

>>64899532
Ya exactly I messed up when I ordered the receiver.

>>64899554
I've put over 2000 rounds of 300blk mix of subs and supers through the current 300blk LAW ARIC project over the past couple of months.
>your 300 blk krink
I wish I had one.

>>64899557
Those two fucked builds got sold during COVID for pretty cheap to the idiot brownoid new mexican.

File: 1714377965204608m.jpg (53.3 KB)

53.3 KB JPG

>>64899704
COVID was wild. Pic rel was sold for 800 or smth right at the start. I know this because I was going to buy it as a parts kit until I saw how badly everything was welded to the receiver. Pro-tip: don't weld trunnions to receivers!

File: 1714378038482954m.jpg (46.1 KB)

46.1 KB JPG

>>64899727
Other side
I wonder how long it took to grenade on the retard who did buy it

>>64899391
>>64899496
original Bulgarian chrome lined barrel but not matching to the rest of the gun. Headspace and rivets are good though

>>64899734
Fucking based, good deal

File: 20260225_060804.jpg (3.1 MB)

3.1 MB JPG

>>64899704
>2000 rounds of 300blk
I only shoot 300 subs so f that the guns barely worth that lmaoo

>>64899536
>>64899529
Holy shit. WhatgripWhatstock has to be the dumbest most insufferable poster here since Lady

File: 1716928579751620.png (373.6 KB)

373.6 KB PNG

>>64899864
>WhatCreaseWhatRivet

File: type 88 3.jpg (271.1 KB)

271.1 KB JPG

>>64899704
why are you pretending to do quantum physics?
>oh hey guys didn't see ya there. You guys totally walked in on me doing smart people stuff

>Ya exactly I messed up when I ordered the receiver.
why did you go through the effort of milling off the bolt and trunnion serial numbers if you were just going to use the wrong receiver. Why not return it and get the right one instead of screwing things up so badly you had to sell it to a Mexican out of shame?

File: PXL_20251016_231718720~2.jpg (3.1 MB)

3.1 MB JPG

>>64899734
>original Bulgarian chrome lined
Nice nice, assuming the build was done right you've got an awesome AK at a good price. WBP chuds staying mad as fuck with their wallhanger paperweight toys made with completely different metallurgy and objectively inferior components, dressed up in pretty new manufacture wood that was specifically chosen to entrap their feeble shallow consoom minds.

>>64900061
>guns barely worth that
If you're still comparing the purchase cost of a firearm to the ammunition cost of actually shooting said firearm, idk what planet you're living on (intellectually) because those things are totally separate.
How quiet is it? What else can you compare it to?

>>64900375
>pretending
Am I pretending?
>why
You're the one claiming I lied and completely fabricated my ASVAB score?
>return it
That isn't how custom ordered Childers receivers work dummy
>milling off the bolt and trunnion serials
First of all, I didn't mill off the bolt serial, I milled off the carrier serial, and it was to force match the serial, which is a common practice for various builds. Why don't you post some of your builds?

>>64900597
Yes I am making the assertion that some one who fucks up his builds and shoots at his tranny fucking friends is in fact, too stupid to score 99th percentile and do quantum physics

>>64900597
>>64899704
The purpose of this photo clearly isn't the optic but the staged as fuck physics which you only posted because people are doubting your ASVAB score

File: PXL_20250928_052835538.jpg (2.1 MB)

2.1 MB JPG

>>64900619
>Friends with trannies
>Actually accidentally ripping machine gun at friends hiding behind rock
>Brain dead and concussed retard vs maybe a couple braincells
Don't know what to tell you except trolling is a art

File: 1692034967127436.jpg (75.6 KB)

75.6 KB JPG

>>64899864
>WhatCreaseWhatRivet
Holy shit my sides

>>64901051
>I w- I was only pretending to be a fucking retard!

NTA you're always bickering with, but surely you realize most folks cannot stand you and knows you're a liar. Why keep up the act?

remove trip and fade back into obscurity

>>64901051
genuinely asking what gripcock does for a living. Are you a nepobaby?

File: 0ck6q0bkiv8g1.jpg (72.2 KB)

72.2 KB JPG

>>64901051
>merely pretending

>>64901422
>Are you a nepobaby?
He has to be. I don't know what he'd do for employment given his pervasive gross incompetence

>>64901472
i just wonder what kind of lifestyle these namefags live as most namefags on /k/ seem to have an ungodly amount of money *and time* despite constantly posting online and spending thousands on guns and gear. I wonder the same thing for YouTubers as well, like that Tactical Advisor guy. Dude was set before getting a YouTube following. I love guns and /k/ posting but I genuinely do not have the time to do all of this Hoplifiel tier gun posting and spending but maybe that's just because I have a wife.

File: Check out my dope pad.jpg (1.3 MB)

1.3 MB JPG

>>64901555
I think a lot of the youtubers get their shit either loaned to them, given to them for review, or use it and sell it off after they're done with it.

File: boltontriggerguard.jpg (358.4 KB)

358.4 KB JPG

I made my own bolt on trigger guard. This way I can easily swap between the Groza latch and the regular AKM trigger guard. Otherwise I'd have to chop the latch portion off and rivet it in place permanently.

Hopefully the plate won't interfere with the Groza trigger linkage. I have no Idea how STINC is going about the FCG.

>>64897027
Its my fault for mixing parts I guess. Thanks

>>64901391
Years ago I used to feel bad watching people bully him while he was trying to figure things out but I've since come to understand them.

>>64901651
>>64901555
>I think a lot of the youtubers get their shit either loaned to them
Basically this. A lot of them don't make much money. Instead they use sponsorships, youtube revenue, and ammo deals to subsidize their hobby. They get loaned guns and ammo to make a review but after that they sell it off or send it back to the manufacturer. Hop and Brass facts did a video about the economics of gun tube operations.

>>64899480
Stuff and things Inc is making a cope Groza kit. This time out of metal not 3d printed plastic

>>64900597
Yea i don't got a $1500 every 2 months in ammo on a range toy budget. It doesn't ring your ears but barely isn't hearing safe

File: sEPRcIN.png (11.2 KB)

11.2 KB PNG

>>64900597
>Nice nice, assuming the build was done right you've got an awesome AK at a good price. WBP chuds staying mad as fuck with their wallhanger paperweight toys made with completely different metallurgy and objectively inferior components, dressed up in pretty new manufacture wood that was specifically chosen to entrap their feeble shallow consoom minds.

>>64902606
Solv

File: 99ae13a2adadb76871cdff0a4d3f015b5da8060f1eda7942cd65cc7c6fb77810_1~2.jpg (77.1 KB)

77.1 KB JPG

>>64901555
Not a namefag but a regular here
>what do you do
Sysadmin
>how do you shit up the place so much with a job?
I post a work. Probably more than I post at home actually.

Krink or Draco?

>>64904380
That’s like asking SVD vs PSL. Cool and soulful vs gypsy copeslop.

>>64904380
hellpup

File: hq720.jpg (93 KB)

93 KB JPG

>>64904380
shit nigga finna cop a draco type shi omm finna slime the opps ya feel me

File: 1495667206563.jpg (62 KB)

62 KB JPG

>>64899355
Good purchase, but check your barrel when you get it so you know what you're in for with shooting it.
You can get corrosive 5.45 from Azerbaijan for not a horrible price, or you may still find corrosive Soviet surplus around. You might get lucky on old stock of commercial stuff from before 2022 if you check some of those hole-in-the-wall shops.
>t. found a NIB .410 saiga and 2 750rnd boxes of Wolf noncorrosive 5.45 for $900 total otd a month ago at a hole-in-the-wall
>>64904418
>"upgrades"
>they do literally nothing at all or even make the gun worse
I know why they do it and why they're like this, but by God does it offend my autism

>>64904477
I unironically want a mini draco for the resident evil village hound wolf squad larp. Shit drips hard.

File: 1756859139550128.png (381.9 KB)

381.9 KB PNG

>>64904418
>>64904477
I'm starting to think there is some sort of greater conspiracy against the micro Draco specifically, not the full size one or the mini. I've seen crazy pricing and seen reports of retailers not wanting to carry them because of the extra hassle when the serial number is run after a crime and gets tied back to that store for the sale, etc. Is it just me?

>>64904717
Email is a remnant from an old post on the BST thread, please ignore.

>>64904717
They cost about 800 give or take 100.

>>64904731
I mean, yeah. That still doesn't account for retailers marking them up way above MSRP. I guess what I'm trying to say is that I wonder is it supply and demand, deterrent pricing, or just taking advantage of people.

>>64904739
my guess is option 3 most of the time, considering the usual micro draco enjoyer

File: ResizedImage_2026-02-26_19-58-27_4838[1].jpg (2.8 MB)

2.8 MB JPG

>>64904380
Both.

File: 1753125255184707.jpg (33.3 KB)

33.3 KB JPG

Need bayonet experts help, looking for a 6×5 bayo, but I'm seeing different names such as 6h5, 6×5, M83/85, and Type 5, which is the correct term?

>looking for a 6x5
>hurrr do i need a 6x5 or sumthin else
Fucking retard

>>64905297
:(

File: 908792387492.jpg (57 KB)

57 KB JPG

>>64905274
6x5 is the most "correct" for the specific bayonet you're after.
All of those mean the same thing though, just different ways to get around the language/alphabet barrier.
>6h5
The symbol for the "h" sound in the Russian alphabet is х, it's name (like "bee" is the name of the symbol b) is "ha." This name is a product of non-Russian speakers trying to replicate the correct sound. You might also see 6Kh5 for the same reason.
>6x5
See above, but with the proper symbol instead of the sound for smoother reading by non-Russian readers identifying it in Russian-language material.
It's the exact same symbol x as we use in English, I've never seen the unicode multiplication sign used for it until you right now.
>M83/85
Date of adoption/production, not really used in Soviet or Russian sources, used in Western descriptions mostly from what I can tell.
>Type 5
That's what the 5 in "6x5" means. It's the 5th bayonet in the series of AK bayonets.

>>64905382
Thank you very much, not sure why the other anon was being rude for.

>>64884899
>mugi
I didnt think she was still around. She had a very short youtube career.

>>64903683
>>64903691
DPM colors? What paint did you use, anon?

File: MyKalashnikov .jpg (938 KB)

938 KB JPG

When all the BS going on in ukraine is over, do you guys think ammo prices for 7.62x39 and 5.45 will drop down again by at least 10 or 20 cents? I know we'll never see it for $4.99 for 20rd again or anything like that, but i desperately want to add an ak74 to my collection.

>>64905545
No
Russian ammo imports will take at least 25 years to even come back, if they ever do. We don't have Perestroika and Glasnost goodwill anymore.
There might be a bump of surplus ammo from Ukraine itself surplussing in the immediate end, but it'll dry up relatively quick and what there is anymore is a big chunk of NATO cartridges that were given/leased. We won't get back that 40% of the ammo market that was Russian imports very easily, so 5.45 is going to stay where it is now for the most part, which isn't awful (like 55cpr? for corrosive Tela) but not great either.
7.62x39 will come down a bit with Balkan ammo (PPU primarily) being redirected to the US though, expect that to come a bit closer to where it was.
The only thing I can think of that would throw a wrench into this prediction is if an RU company full sends on import-washing their stuff in Hungary, Cyprus or Mongolia or somewhere else like that to get around sanctions, which I think is rather unlikely.

File: minidraco.jpg (1.8 MB)

1.8 MB JPG

>>64904418
MY NIGGA!

File: Img989098.jpg (1.1 MB)

1.1 MB JPG

>>64905578
I figured. I dont think the import bans will ever truly go away. The same way the chinese ammo never came back. I was hoping more along the lines that once the war is over, all the countries like Romania, Poland, Bulgaria, and the Balkan states would be able to sell more on the open market for imports.

>>64884899
>>64905502
She's fat now

>>64905545
>>64905656
Does the PSO-1 sit offset to the left of your irons?

>>64905656
>Russian imports banned
>Romania is currently switching to the ARX160 in 5.56, expect the 5.45 production to slowly wind down over the next decade and a half until it dies
>Poland has been on 5.56 since the 90s, they only make enough to arm militias with old Tantals now really, same story as Romania
>Bulgaria issues 7.62x39 rifles primarily and only really does 5.45 for contract export sales to governments
>former Yugoslav states never produced 5.45 because they never used it
>Ukraine's ammo production facilities are either geared for 5.56 (in the west of the country) or controlled by Russia
One of the factories that made the old Red Army Standard ammo is in Luhansk, in the Donbass.
5.45 is on life support unless a miracle happens (namely, stateside production both of-scale and at a good price, which won't happen).
7.62x39 should improve a good bit, like I said before.

>>64905708
I love fat chicks

>>64905710
NTA but yes. lots of side mount optics are offset

File: Offsetafboi.jpg (71 KB)

71 KB JPG

>>64905710
Indeed it does.

>>64905723
As I feared. My hope was that at least they would still have the tooling and such for it and would at best be able to just make it for shits and gigs for either the US demand, or for the few places outside of russia that still use it. It's seeming like 5.45 is will go extinct soon enough. Us production would make it not even worth shooting with the price, id surmise probably like at least $1 a pop. US made 7.62x39 is basically cheap .308 price.

I'll realistically probably just shoot off the 7.62x39 I have an strip the paint off the rifle and just keep it as a collectors item, sadly.

File: Screenshot_20230816_142108.jpg (464.6 KB)

464.6 KB JPG

>>64905710
>>64905728
>>64905813
Hell yeah they do

File: Peakdripreticle.jpg (646.7 KB)

646.7 KB JPG

>>64905886
I miss those type of views, anon. It reminds me of Colorado. I was stationed at fort carson, and miss nature like that a lot. Such a shame to see what happened to that state. I live in TX now, and it isn't anywhere near as nice looking.

>>64905915
I wish Texas was as based as the hardcore Texas fags make it out to be. Its ugly and full of brown people and the few remaining whites are typically obese.

>>64906077
100% this. Texas really is severely overblown. It quite honestly lowkey sucks in a lot of ways.

Lots of places to shoot, but you need to pay for all of them.

>>64905708
Sauce it up. Let's have a look.

File: mini_psl.jpg (157.9 KB)

157.9 KB JPG

I received my scope
but fuck me, the barrel is not in the same axis as the receiver i cant zero it at all
currently looking at my option - swapping the rifle, taking it to an armorer

File: PXL_20250902_010754377~2.jpg (2.9 MB)

2.9 MB JPG

>>64906898
ngl aesthetic and fun build. Sorry about the zeroing issues. Happens. Not sure what the best course of action is, but I definitely support getting it working. Also find a steel shorty mag, the magpul one is killing the vibe. But fun gun dude, will be cool to hear it with subs.

>>64901391
>remove the trip
I've maintained this for like a decade now. Anon's that get buttmad simply and solely based on the fact that some anons decide to trip have their own unresolved ego insecurities (like a tranny). Unironically like an angsty mad middleschooler that can't stand that someone else might be so optimistic and spiritually positively motivated so as to actually try to answer questions in class or actually try to run hard in gym because of their own sense of self shame at their own fear of actually trying honestly at anything.

>>64901555
>lifestyle
>ungodly amount of money *and time*
The power of autism idk what to tell you bruh

>>64906998
I dont think youre good at gym or school given how many concussions you have

>>64906898
>but fuck me, the barrel is not in the same axis as the receiver i cant zero it at all
An easy way to check if the rail is level is to drop a caliper off the edge of the receiver. The distance from the receiver top to the rail should be roughly equal at the front and and end of the rail. The exact measurement doesn't really matter so long as they're within a hundredth or so of each other

If its super off they'll have to remove the scope rail and re-rivet it so that its parallel with the barrel. One or two of the holes will have to be welded up and redrilled. Also look at the clamp for the PSO. Are there any burrs or damage on it?

>>64906998
shit for brains nepobaby. got it

File: Screenshot_20260227_105232.jpg (600.8 KB)

600.8 KB JPG

>>64906898
"mom can we get SVD"
"we have SVD at home"
>SVD at home

On that note, I need to find a PSL/CUR stock and carve it up to resemble a proper SVD stock.

File: image_2026-02-27_141157114.png (172.5 KB)

172.5 KB PNG

>>64907587
here you go my nigga
https://www.apexgunparts.com/romanian-psl-fpk-7-62x54r-buttstock-com

>>64907879
Danke, I wonder if they'll send it to me in WA. RApex overcomplies with our shitty laws, they won't ship 10 round mags to me.

File: OPqdMVO.jpg (900.5 KB)

900.5 KB JPG

>>64907891
praying for you my nigga. Its a compliant stock AFAIK so I don't see why they wouldn't. There are some vendors that wont ship parts to CA without an ID or FFL

>wbp apparently coming out with problems
Damn, who you even get an AK from anymore? Zastava still imports, right?

>>64907925
you're probably baiting but in the event you're being genuine I suggest you ask elsewhere like AKfiles, arfcom etc. This general isn't capable of making honest discussion about either of those brands. The last 3 threads have been shit up by dishonest retards fighting over it

>>64907925
Just buy a WASR

>>64907950
Nah I'm just out of the game.
>>64907954
I thought they didn't sell those anymore

>>64907975
"They" never stopped selling WASRs. Atlantic has them for $850 right now, in stock.
Where is this "WASRs aren't getting imported" shit coming from? That's two people who've said this here with no proof in like a week. The only thing I can think of is that Century renegotiated their price per unit in 2024, but that was less than a month between end of old contract and start of new one with no interruption of imports.
You can literally check Century's import records yourself, they had a massive import from ROMARM Cugir approved in December 2025.

>>64907925
I’d stick with Zastava, myself. They still seem good to go.

File: saoSatoruYugoM21YugoM85AK.jpg (218.5 KB)

218.5 KB JPG

>>64907975
Wasrs are still available for less than either of the options you mentioned earlier. The WASR is uncontroversial and available. If you can't be fucked to do any research get a WASR, otherwise take your questions elsewhere because this place is a shithole full of retards

Do we hate Meridian AKs here or are they good if you have the scratch?

>>64908051
Meridian AK's are just reassembled Romanian parts kits. Made to scam normgroids and youtubers out of money

File: 1758235110593642.png (893.9 KB)

893.9 KB PNG

>>64905274
If you're able to find one that looks decent and is decently priced, let me know. I've seen surplus ones that are really just beat to crap or absurdly expensive. This is one of the examples that is available at Royal Tiger Imports, these are Ethiopian surplus apparently. I'm surprised there aren't Chinese clones of bayonets readily available..

>>64908006
>>64908013
Nice. Yeah that's p dece for nowadays
>>64908009
That's good

>>64905886
>>64905915
Why does one scope say 1.8 and the other 1.7?

Just bought an 1,100 round crate of Yugo m62 on SKS clips for $540. I was down to 400 rounds of Trump Slump era golden tiger

>>64908349
M67…

File: sad[u]_rifle.jpg (3.4 MB)

3.4 MB JPG

>>64906998
thanks, aint she a beaut' ?
did not find some cheap steel mags atm, but i figured the magpul should do the trick for prone shooting

>>64907088
sadly, the rail is not the problem here
the barrel is pointing to the left (should not be surprising for a romanian gun)
i might just swap it (at a loss - putting back the original rear sight and furniture) but choosing one where the barrel is colinear with the rail
see picrel

>>64907587
im reaching for a mashup of vintorez / psl (svd-ish) / akm to celebrate my favorite stalker guns and romania
is picrel yours ?
i have a m76 which is a pain in the bank account to shoot, so i wanted something cheaper to shoot, silenced and fucking pretty

>>64907912
damn that a looong barrel

File: 20250401_013501 (1).jpg (3.3 MB)

3.3 MB JPG

>>64908202
1,8m is the average height of an adult man. Not sure why some have 1,7m but probably some hunting regulation. Some you'll see with 1,4m rangefinder references and that is for hunting. Specifically the height at the shoulder of some species of deer they have in eastern europe they hunt a lot of.
>>64908529
Ye is mine, I don't have that stock anymore but a different anon here does (sold it off-site and it ended up here lol).
It sounds kind of like my Saiganov project that is on ice for now.

>check /akg/ after several months away
>still infested with tripfags and the retards that reply to them shitflinging about wbp
cool, be back in another few months, maybe

>>64908529
What distance are you attempting to zero at? Did the scope come with a manual, etc? The PO 3.5x21P that I have requires a 100m initial zero for the bdc to be accurate, and those scopes often have an extremely huge degree of adjustment in the turrets. Hundreds of clicks in either direction. Might equate to 1cm at 100m. Maybe count how many clicks till you get to mechanical zero both ways and then go back to the range. Just something to consider, Also, is the clamp completely torqued and secured to the firearm? There should be a retainer plate at the bottom of the assembly, remove that and tighten the lever till it is firm, then reattach. There are videos explaining that if needed. I wouldn't give up just yet.
>>64908529
That looks to be within the typical tolerances of an AKM. I'd think you'd have had a catastrophic failure by now if the barrel was canted that severely.

File: K.jpg (32.2 KB)

32.2 KB JPG

>>64908659

>>64908701
i didnt shoot it yet with the scope
i tried doing a pre zero with the laser bore sighter, at 5m (inside the house) and 200m (neighbor wall), the laser dot of the bore sighter is always in the region from my pic
the same dot is coherent with the iron line of sight
i cant even walk the reticule to this position, so assuming the bore sighter is mostly correct, i cant zero the scope

i adjusted the clamp tension before trying to zero, to the point where it is slightly harder than i like to open the lever (both my m76 were easier)

rifle is safe to fire, the iron works as they should, a red dot sight (with an adapter) works fine, but i just dropped some money on a scope that i cant use, hence im sad

File: russianwithm16A2.jpg (471.2 KB)

471.2 KB JPG

>>64908765
That sucks. I'm still not entirely convinced that its the rifle that's off. I take it you can't mount the scope to any of your other rifles?

Have you checked the front trunnions alignment in the receiver? If you take the lower handguard off does it look like the trunnion sticks out or is recessed on one side of the receiver? That's the only other thing I can think of. I've had Romanian trunnions that had the rivet holes drilled crooked so one side wasn't flush with the front of the receiver.

Is the rail flush with the receiver? Sometimes the center support rivet underneath is a bit too tall and it cocks the rail off to one side. You shouldn't be able to see daylight or fit a piece of paper underneath it

>>64908765
I mean... Verify it with live ammunition. A laser isn't a completely reliable substitute for live fire. The diode could be slightly off center from being loaded into the chamber. Do that first then determine if the scope has a problem. And figure out where the initial zero is supposed to be. It's not a red dot, if you don't figure out where the initial zero should be the whole scope and all distances are not going to be accurate. Invest the time to learn about the scope and do it the right way the first time.