>>28862669
Man these are ugly as fuck God damn, wtf happened

Finished rear bushings today, car is getting aligned as we speak

File: IMG_20260301_132255862.jpg (2.4 MB)

2.4 MB JPG

Alignment done! Gonna get those alignment stands from FM, they will pay for themselves at this point

>>28863296
noticed any difference?

Confusing
>>28861249

File: 6c751ccc-36cb-4838-8479-394ca21025af~1.jpg (2.3 MB)

2.3 MB JPG

>>28863309
It definitely stiffened the rear. It feels like more feedback but it isn't harsh like the poly bushings in the rx7. 10/10 would recommend. I went to push the bushing out of the hub and it pushed out real easy, then used a ball joint press to put the new ones in. Took about 4 hours yesterday to do passenger side, then 2 hours for driver side today. Also put on the Cannon Rear brace. Suspension is finally done! Just waiting on ITBs to show up...

Ignore the mud, I need to get one of those things for the power washer for doing undercarriages.

>>28863471
Which bushings? Been thinking about superpros for my NB.

>>28863530
Flying Miata sells the IL motorsports bushings. Went with them over poly because I have polys on the rx and they are much stuffer. These are like 40% stiffer than stock or something, and still rubber so no maintenance.

I bought an entire set of U/L control arms and pressed them in myself off the car during winter. This weekend was just remove and replace, and annual alignment.

No idea on how super pros are so can't help you there, but if you wanted to remove and put the new bushings in a weekend it will be a looooong weekend.

File: IMG_20260228_132554186_HDR.jpg (3 MB)

3 MB JPG

This site eats my pictures. Here is driver stock before I replaced stuff

most of my front end is comprised of close out items from rock auto, ball joints, tie rods.
i got proper end links, and wheel bearings, suspention.
how fucked am I if I go 10/10?